I had REAL concerns about taking the axle and drive shaft assemblies to media blast. The blaster and others told me I was worrying too much. Here the axles are sealed with Gorilla Tape. I filled the pumkin with rags and sealed that as well with tape.
I took the drive shaft and bagged the ends, then sealed.
This in fact did not work, grit was everywhere. Fortunately, it did not matter in the end, as I ended up disassembling and cleaning everything anyway, as you will see.
I took the drive shaft and bagged the ends, then sealed.
This in fact did not work, grit was everywhere. Fortunately, it did not matter in the end, as I ended up disassembling and cleaning everything anyway, as you will see.